Gyuto 270mm

This Tetsu Gyuto feature a big and long blade, good distal taper, thin tip. Flat profile from the heel with a curve toward the tip. The San-mai is laminated by myself in house. Forged to shape and to geometry the blade is ground on water cooled grinding wheel then finish by hand on bench stone. It's a big knife but I manage to keep the balance point at the pinch grip so it feel light in your hand. 

Specs :

- Name : Gyuto
- Year : March 2026
- Construction : San-maï (3 layers)
- Range : Tetsu KU
- Geometry : Medium to thick thickness
- Blade length (heel to tip) : 270mm
- Blade height (at the heel): 60mm
- Hagane : 135Cr3
- Jigane : Wrought iron (clean)
- Handle : Wa (Octogonal), stabilised & dye Maple with G10 (from Blockworks)
- Balance point : Pinch grip
- Distal taper : 6.7 / 2.7 / 0.7 mm
- Weight : 298.3 grams
- Finish : Kurouchi with Kasumi
- Special feature : Take down handle with brass pin and tool
- Observation : 

- Hardness : ≥ 64HRC

Allow me a couple of days to sharpen and send the knife to you. If any question or requirement, just message me at hello@simonmaillet.com.

My blades are made from carbon steel not stainless steel as it gives my knives an unbeatable sharpness. I prefer carbon steel for it ease to sharpen, the fine edge it takes and the beautiful patina that will develop. You do, however, need to give carbon steel knives just a little extra care to keep them in top shape. There are trade-offs in everything. Claddings stated as "dirty wrought iron" will be more reactive. 

My handles are made from local, untreated, un-stabilised wood. I use oil and varnish to protect them. The color, may change with use. 

French postage with Chronopost / Colissimo

International postage with DHL express / UPS