Gyuto 235mm
This Tetsu Gyuto feature a long blade, very good distal taper, thin tip. Flat profile at the heel with a slight curve toward the tip. The San-mai is laminated by myself in house. Forged to shape and to geometry the blade is ground on water cooled grinding wheel.
Specs :
- Construction : San-maï (3 layers)
- Range : Tetsu KU
- Type : Medium thickness
- Blade length (heel to tip) : 235mm
- Blade height (at the heel): 56mm
- Hagane : 135Cr3
- Jigane : Dirty wrought iron
- Handle : Wa (octogonal), with burnt Oak (take down)
- Balance point : Pinch grip
- Distal taper : 6.1 / 1.8 / 0.8 mm
- Weight : 204.4 grams
- Finish : Kurouchi with Kasumi
- Special feature : Take down handle with tapered brass pin and tool
- Observation : Dirty cladding with some inclusion within the wrought iron (see photos)
- Hardness : ≥ 64HRC
Allow me a couple of days to sharpen and send the knife to you. If any question or requirement, just message me at hello@simonmaillet.com.
My blades are made from carbon steel not stainless steel as it gives my knives an unbeatable sharpness. I prefer carbon steel for it ease to sharpen, the fine edge it takes and the beautiful patina that will develop. You do, however, need to give carbon steel knives just a little extra care to keep them in top shape. There are trade-offs in everything. Claddings stated as "dirty wrought iron" will be more reactive.
My handles are made from local, untreated, un-stabilised wood. I use linseed oil, bees wax or varnish to protect them. The color, may change with use.
French postage with Chronopost / Colissimo
International postage with DHL express / UPS