Bushcraft 130mm
This Tetsu Bushcraft knife feature a small and thick blade, good distal taper, thin tip. Flat profile at the heel with a upward curve toward the tip. The San-mai is laminated by myself in house. Forged to shape and to geometry the blade is ground on water cooled grinding wheel then finish by hand on bench stone.
Specs :
- Name : Bushcraft
- Year : February 2026
- Construction : San-maï (3 layers)
- Range : Tetsu KU
- Geometry : Medium
- Blade length (heel to tip) : 130mm
- Blade height (at the heel): 37mm
- Hagane : Shirogami 1 (White paper)
- Jigane : Wrought iron
- Handle : Barrel (wider in the center), Walnut (big handle)
- Balance point : At the touch mark
- Distal taper : 4.7 / 2.8 / 1.9 mm
- Weight : 138.1 grams
- Finish : Kurouchi with Kasumi
- Special feature : Take down handle with brass pin and tool
- Observation :
- Hardness : ≥ 64HRC
Allow me a couple of days to sharpen and send the knife to you. If any question or requirement, just message me at hello@simonmaillet.com.
My blades are made from carbon steel not stainless steel as it gives my knives an unbeatable sharpness. I prefer carbon steel for it ease to sharpen, the fine edge it takes and the beautiful patina that will develop. You do, however, need to give carbon steel knives just a little extra care to keep them in top shape. There are trade-offs in everything. Claddings stated as "dirty wrought iron" will be more reactive.
My handles are made from local, untreated, un-stabilised wood. I use oil and varnish to protect them. The color, may change with use.
French postage with Chronopost / Colissimo
International postage with DHL express / UPS